Antminer D3 15GH/s


Bitmain Antminer D3 15GH/s


Specifications:


1. Hash rate: 15 GH/s (Variation of ±5% is expected)
2. Hashing algorithm: X11
3. Power consumption: 1200W (at the wall, with Bitmain’s APW3 PSU, 93% efficiency, 25°C ambient temp).
4. Power Efficiency: 1.6 J/MH + 10% (at the wall, with APW3 93% efficiency, 25°C ambient temp)
5. Rated Voltage: 11.60 ~13.00V
6. Dimensions of the miner: 320*130*190mm
7. Operating Temperature: 0 °C to 40 °C
8. Network Connection: Ethernet


Notes:


Power consumption figures will vary with your PSU’s efficiency, the ambient operating temperature and the accuracy of the power meter.


PSU: A power supply unit is not included. You will need an ATX PSU with at least 9 six-pin PCIE connectors. There are 2 PCI-e connectors for +12V DC input on each hashing board and all 2 are required. Do not connect more than one PSU to the same hashing board!


We recommend the APW3 ++ power supply for use with the Antminer D3 15GH/s. One power supply supports one Antminer D3 15GH/s.


Separate power supply to control board: there is one additional 6pin PCI-e connector on the IO board which must be connected to the PSU to get power. Be sure to power on the miner only after all the 9 PCIE connectors are connected to power supply.

*NOTE: THIS IS A PRE-ORDER MINERS WILL BE SHIPPED BETWEEN 1 OCT-25 OCT

Write a review

Note: HTML is not translated!
    Bad           Good
  • Product Code: Bitmain Antminer D3 15GH/s
  • Availability: In Stock
  • $699.00
  • $99.00


  • 10 or more $89.00
  • 50 or more $79.00
  • 100 or more $49.00

This product has a minimum quantity of 5